- has BGS function, stable detection
- 01
- IP67 Protection level, sturdy and durable
- 02
- High sensitivity dual color LED indicator light
- 03
- Superior anti-interference ability
- 04
has BGS function, stable detection
is within the specified detection range, and is not easily affected by the color, morphology, and surface structure of the workpiece. It can stably detect black, white, low reflectivity, and high reflectivity workpieces.
IP67 Protection level, sturdy and durable
PG2 Each model of the series is equipped with an IP67 protection level, which is sturdy and durable, ensuring the stability and service life of the equipment even under harsh working conditions.
High sensitivity dual color LED indicator light
PG2 All models in the series are equipped with clear and visible dual color indicator lights, allowing users to clearly identify the detection status from multiple angles.
Equipped with a mechanical knob
, the sensitivity can be adjusted through the knob, which can improve the accuracy of detection at different distances and materials.
PG6 The series adopts a unique chip and external anti-interference light algorithm, which can effectively suppress environmental light interference and sensor mutual interference.
&Nbsp;
&Nbsp;
&Nbsp;
| Type |
BGS diffuse reflection
|
correlation | Mirror reflection | |||
|
model
|
NPN output
|
PG2-D18 | PG2-D36 | PG2-D120 | PG6-T15M | PG6-M6M |
|
PNP output
|
PG2-D18P
|
PG2-D36P
|
PG2-D120P | PG6-T15MP | PG6-M6MP | |
|
Detection distance
|
1~18mm |
1~36mm
|
2~120mm | 2m | 2m | |
|
Distance setting range
|
4~18mm
|
5~36mm
|
20~120mm | — | ||
|
Deviation of strain
|
Below 2% of action distance | — | ||||
|
Repeatability
|
Below 1mm
|
Below 0.05mm | ||||
|
Supply voltage
|
12V ~24V DC ±10% pulse below P-P 10% | |||||
|
Consumption current
|
Below 15mA | Transmitting terminal：Below 10mA Receiving end：Below 15mA |
Below 15mA | |||
|
Output
|
Control output
|
NPN Open collector transistor PNP Open collector transistor · Maximum inflow current： 50mA · Maximum inflow current： 50mA Applied voltage：·below 30V DC(Between output and 0V) · below 30V DC( Between output and +V) · Residual Voltage：below 1V( Incoming current flow100mA ) · Below 0.4V（ Inflow current 16mA ） |
||||
|
Output action
|
NC（normally closed） / NO（normally open）
|
|||||
|
Protection circuit
|
Short circuit protection, power reverse polarity protection and overload protection
|
|||||
|
Reaction time
|
below 0.5ms
|
|||||
|
Working status indicator
|
Orange LED ( On when output is ON )
|
|||||
|
Power indicator light
|
Green LED ( When energised light up )
|
|||||
| environment resistance |
protection grade
|
IP67 ( IEC )
|
||||
|
Service ambient temperature
|
-25℃~ +55℃（Pay attention not to condensation and freezing）、When stored：-30℃~+70℃ | |||||
| Operating environment humidity |
35%RH~85%RH、When stored：35%RH~85%RH
|
|||||
| Resistant to ambient light |
incandescent lamp：illumination of receiving surface below 3000lx
|
|||||
|
withstanding voltage
|
AC1000V 1 minute Between all power connection terminals and enclosure
|
|||||
|
Resistance to electrical resistance
|
Between all power connection terminals and enclosure， Megger above 20M Ω, based on DC 250V
|
|||||
|
Vibration
|
Frequency 10Hz~500Hz, double amplitude 1.5mm (MAX.10G), 2 hours in X, Y and Z directions
|
|||||
| Impact resistance |
Acceleration of 500m/s ² (about 50g), 3 times in X, Y and Z directions respectively
|
|||||
|
material
|
Enclosure: PC+ABS， Lens: PMMA
|
|||||
|
cable
|
Core (opposed emitter: 2 cores), 2m long | |||||
