Product Features
Integrated shell design
The world's leading IP67 protection level
The detection distance of 6mm
Easily adjust
&Nbsp;
- Integrated shell design, reinforced and thickened
- 01
- Global leading IP67 protection level, effective waterproof and dustproof
- 02
- Detection distance 6mm, reducing collision risk
- 03
- Highly integrated professional single chip, with a response time of 10μ S
- 04
Integrated shell design
PK The series adopts high hardness ABS material, and the integrated shell is reinforced and thickened to improve the durability and stability of the product.
The world's leading IP67 protection level
has no gap between the detection surface and the main body, greatly reducing the possibility of faults caused by water, dust, etc.
The detection distance of 6mm
greatly reduces the risk of impact on the detected object and location.
Easily adjust
to confirm the up and down positions of the optical axis based on the projection and reception markings, and easily adjust the position of the detected object& Nbsp;
&Nbsp;
| model | PK-□25 | PK-□25P | |
|
type of output |
NPN output | PNP output | |
|
detection distance |
6mm ( fixed ) | ||
|
Minimum detectable object |
0.8mm x 1.2mm Opaque body | ||
|
Deviation of strain |
Below 0.05mm | ||
|
repeatability |
Below 0.01mm | ||
|
supply voltage |
12V DC ~24V DC ±10% | ||
|
Consumption current |
Below 15mA | ||
|
output |
control output | NPN Open collector transistor · Maximum inflow current： 150mA · applied voltage：Below 30V DC( Between output and 0V) · Residual Voltage：Below 1V( Inflow current 150mA) |
PNP Open collector transistor
· Maximum inflow current： 150mA· applied voltage：Below 30V DC( Between output and 0V ) · Residual Voltage：Below 1V( Inflow current 150mA) |
| output action | When entering light ON/Non-luminous time ON ( Equipped with 2 kinds of output ) | ||
| Short circuit protection | Reverse connection protection of power supply and output short circuit protection | ||
|
reaction time |
When entering light：Below 10μs，In case of shading：Below 50μs ( The maximum response frequency is 3KHz ) | ||
| Working status indicator | Red LED (Light on when entering light) | ||
| environment resistance | protection grade | IP67 ( IEC ) | |
| Service ambient temperature | -25℃ ~ +55℃ ( 注意不可结露、结冰 ) 、存储时：-30℃ ~ +80℃ | ||
| Operating environment humidity | 35%RH ~ 85%RH、When stored：5%RH ~ 95%RH | ||
| Resistant to ambient light | Fluorescent lamp: Illumination of receiving surface below 2000lx | ||
| withstanding voltage | AC1000V Minutes between all power connection terminals and enclosure | ||
| Resistance to electrical resistance | Megger based on DC 250V above 20M Ω between all power connection terminals and enclosure | ||
| Vibration | Frequency 10Hz~500Hz, double amplitude 1.5mm (MAX.10G), 2 hours in X, Y and Z directions | ||
| Impact resistance | Acceleration of 500m/s ² (about 50g) 3 times in X, Y and Z directions respectively | ||
|
light source |
Infrared LED ( 855nm ) | ||
|
material |
casing：ABS，Lens (project and receiving parts)：PC | ||
|
cable |
4 Core( Brown, blue, black, white)，length 1m | ||
