- has BGS function, stable detection
- 01
- IP67 Protection level, sturdy and durable
- 02
- High sensitivity dual color LED indicator light
- 03
- Superior anti-interference ability
- 04
has BGS function, stable detection
is within the specified detection range, and is not easily affected by the color, morphology, and surface structure of the workpiece. It can stably detect black, white, low reflectivity, and high reflectivity workpieces.
IP67 Protection level, sturdy and durable
PG6 Each model of the series is equipped with an IP67 protection level, which is sturdy and durable, ensuring the stability and service life of the equipment even under harsh working conditions.
High sensitivity dual color LED indicator light
PG6 All models in the series are equipped with clear and visible dual color indicator lights, allowing users to clearly identify the detection status from multiple angles.
Equipped with a mechanical knob
, the sensitivity can be adjusted through the knob, which can improve the accuracy of detection at different distances and materials.
PG6 The series adopts a unique chip and external anti-interference light algorithm, which can effectively suppress environmental light interference and sensor mutual interference.
| Type |
BGS diffuse reflection
|
BGS linear diffuse reflection | Correlation | Mirror reflection | |||||
|
Model
|
NPN output
|
PG6-D100
|
PG6-D100 | PG6-D300 |
PG6-D500
|
PG6-D900 | PG6-D125 | PG6-T15M | PG6-M6M |
|
PNP output
|
PG6-D100P
|
PG6-D100P |
PG6-D300P
|
PG6-D500P
|
PG6-D900P | PG6-D125P | PG6-T15MP | PG6-M6MP | |
| Detection distance |
5~100mm
|
10~100mm |
10~300mm
|
10~500mm
|
1000mm | 5~125mm | 15m | 6m | |
|
Distance setting range
|
20~100mm
|
20~100mm |
30~300mm
|
30~500mm
|
30~900mm | 10~125mm | — | 10mm~6m | |
|
Deviation of strain
|
Below 2% of action distance
|
Below 5% of action distance | Below 2% of action distance | — | — | ||||
|
Repeatability
|
Below 1mm
|
||||||||
| Supply voltage | 12V~24V DC ± 10% pulsation P-P below 10% | ||||||||
|
Consumption current
|
Below 20mA
|
Transmitting terminal：Below 25mA Receiving end：Below 10mA |
Below 25mA | ||||||
|
output
|
control output | NPN open collector transistor PNP open-circuit collector transistor · Maximum inflow current： 100mA · Maximum inflow current： 100mA · applied voltage： 30V DC below( Between output and 0V ) · Residual voltage: Below 2V (inflow current 100mA) · Below 1V (incoming current 16mA) |
|||||||
| output action |
NC（normally closed） / NO（normally open）
|
||||||||
| Protection circuit | Short circuit protection, reverse polarity protection of power supply, overload protection | ||||||||
| reaction time | Less than 1ms | ||||||||
| Work status indicator light |
Orange LED (lights up when output is ON)
|
||||||||
| Power indicator light | Green LED (lights up when powered on) | ||||||||
| Sensitivity regulator | Equipped with a mechanical regulator | — | Equipped with a mechanical regulator | ||||||
| environment resistance | protection grade |
IP67 ( IEC )
|
|||||||
| Environmental temperature for use | -25℃~ +55℃（Be careful not to condense or freeze）、When storing：-30℃~+70℃ | ||||||||
| Environmental humidity for use |
35%RH~85%RH、When storing：35%RH~85%RH
|
||||||||
| Resistant to ambient light |
incandescent lamp：Light receiving surface illumination below 3000lx
|
||||||||
| withstanding voltage |
AC1000V 1 minute Between all power connection terminals and the casing
|
||||||||
| Resistance resistance |
Between all power connection terminals and the casing， 20M Ω or above, based on DC 250V high resistance meter
|
||||||||
| Vibration | Frequency 10Hz~500Hz, dual amplitude 1.5mm (MAX.10G), 2 hours in X, Y, Z directions | ||||||||
| Impact resistance | Acceleration of 500m/s ² (approximately 50g), 3 times in each of the X, Y, and Z directions | ||||||||
|
material
|
Shell: PC+ABS， Lens: PMMA
|
||||||||
|
cable
|
4-core (2-core for opposite emitter), length 2m | ||||||||
