PK-45 Series

小型 · 电缆型槽型传感器


  • Industry leading IP67 protection level, reinforced and thickened integrated shell design;
    6mm groove width effectively reduces collision risk;
  • A reaction time of 10μs significantly improves detection efficiency.。
  • Product advantages
  • Parameter specifications
  • Product size
  • Wiring diagram
Product Features
Integrated shell design, reinforced and thickened
01
Global leading IP67 protection level, effective waterproof and dustproof
02
Detection distance 6mm, reducing collision risk
03
Highly integrated professional single chip, with a response time of 10μ S
04

Integrated shell design

PK The series adopts high hardness ABS material, and the integrated shell is reinforced and thickened to improve the durability and stability of the product.


The world's leading IP67 protection level

has no gap between the detection surface and the main body, greatly reducing the possibility of faults caused by water, dust, etc.


The detection distance of 6mm

greatly reduces the risk of impact on the detected object and location.


Easily adjust

to confirm the up and down positions of the optical axis based on the projection and reception markings, and easily adjust the position of the detected object& Nbsp;

 model  PK-45  PK-□45P

 type of output

 NPN output  PNP output

 detection distance

 6mm ( fixed )

 Minimum detected object

 0.8mm x 1.2mm Opaque body

 Deviation of strain

 0.05mm below
repeatability  0.01mm below

 supply voltage

 12V DC ~24V DC ±10%

 Consumption current

 below 15mA

 output

 control output  NPN open collector transistor
 · Maximum inflow current: 150mA
 · applied voltage:below 30V DC(Between output and 0V ) 
 · Residual Voltage:below 1V( Inflow current 150mA )
PNP open collector transistor
· Maximum inflow current: 150mA
· applied voltage:below 30V DC( Between output and V )
· 剩余电压:below 1V( Inflow current 150mA )
 output action  When entering light ON/Non-luminous time ON ( Equipped with 2 kinds of output )
 Short circuit protection  Reverse connection protection of power supply and output short circuit protection

 reaction time

 When entering light:below 10μs,In case of shading:below 50μs ( The maximum response frequency is 3KHz )

 Working status indicator

 Red LED (Light on when entering light )

 environment resistance

 protection grade  IP67 ( IEC )
Service ambient temperature  -25℃ ~ +55℃ ( Pay attention not to condensation and freezing ) 、When stored:-30℃ ~ +80℃
 Operating environment humidity  35%RH ~ 85%RH、When stored:5%RH ~ 95%RH
Resistant to ambient light  fluorescent lamp:Illumination of illuminated surface below 2000lx
 withstanding voltage  AC1000V 1 Minute Between all power connection terminals and enclosure
 Resistance to electrical resistance  Megger based on DC 250V above 20M Ω between all power connection terminals and enclosure
 Vibration  Frequency 10Hz~500Hz, double amplitude 1.5mm (MAX.10G), 2 hours in X, Y and Z directions
 Impact resistance  acceleration 500m/s² ( about 50g ) Three times each in the X, Y, and Z directions.

 light source

 infrared LED ( 855nm )

 material

 casing :ABS,lens ( Projection and receiving parts ):PC

 cable

 4 rush pith (Brown, blue, black, white),length 1m